Best stone and brick cleaning method

washing power

Power washing can be used to clean the exterior and interior walls of the bricks. Power washing can be used up to a distance of 100 feet from the structure being cleaned. If not used with care and within reasonable limits, clean water pressure can damage the walls. For example, if the pressure is above the nozzle at 700 psi can damage the bricks and mortar joints erode.

mining services

Explosion is an industrial process in which the surface is treated to make them smooth or rough grinding on the surface of the spray is pressed. This treatment has a wide range of industrial applications, including; Removing contamination from the surface, polishing and removing rust.

Abrasive substance used depends on what is pure. And what happens after cleaning. This cleaning method can be used to remove organic materials (moss / lichen / algae) on most surfaces, especially brick and stone. Heat of the water helps to completely kill spores of organic matter, increasing the time between cleanings. This system is used to remove paint from stone and brick (in some cases, the color of the softener should be applied to the surface to assist removal).

Torc remove and clean

Download system (which uses superheated water) varies with the action of other systems. Use water "overheated" nozzle in the form of the fan. This method uses the method or the system of water supply which then reaches the pump unit is a high pressure. Here the pressure is increased to the required level before entering the "HotBox". The pressure can be set by the operator and is not dependent on the temperature setting. In the heating, the temperature rising to 150 before passing through a heat-resistant nozzles. This nozzle directs hot water over the surface to be cleaned within range.

In addition, Torc systems can be applied to remove stains atoms lime sulfation and color of cement, asphalt, waste paint and old paint, oil-based and limestone. Torc system works by creating a soft swirling vortex then mix low air pressure, a little water and safe inert fine granules used.

Choosing a technical professional cleaning, it is important to ensure that they are not only highly qualified, but qualified and insured.

brick and stone cleaning professional companies such as http://www.propoint-uk.co.uk/ because they are a good place to start when looking for a competent contractor.